CPM-6 - 3.09
DSP-2 - 4.02
DSP-3 - 4.02
SCM-1 - 3.03
SCM-2 - 3.03
Instructions (CPM, DSP modules)
- Click on the applicable link(s) above
- Enter your contact information (name and email)
- Download the *.s19 file to a directory on your computer
- Repeat the above steps for all modules needed, or "Download All"
- Download the Netburner tools
- Unzip the Netburner tools
- Configure your computer to the same subnet as the unit to be updated
- Run AutoUpdate.exe
- Enter the IP address of the unit or click ‘Find’
- Click Browse and select the *.s19 file
- Check “Reboot when complete”
- Click Update – the firmware will be loaded into the unit
- Click OK – the unit will reboot, running the new version
Instructions (SCM modules)
- Configure your computer to the same subnet as the unit to be updated
- Access the unit via its browser interface
- Load the .web firmware file from the Administration page of the browser interface
- See the manual for further details