Version - 1.3
Instructions
- Power on the ACU-5000 and wait for it to start.
- Browse to the ACU-5000 and log in as the super user.
- Verify the software needs to be updated by checking its current version.
- Do this by navigating to the 'Help -> About' dialog. If the version matches what is listed above the software does not need to be updated.
- If the software needs to be updated, navigate to 'System -> Software Update'.
- Click on the 'Browse' button and locate the software update package downloaded from above.
- Select the file and click 'Open'.
- Click the 'Upload Software' button. After a few moments, the software should appear in a chart at the top of the page.
- Select the software in the chart by clicking on the small circle on the left-hand side.
- Click the 'Apply Selected Version' button. After a moment, the 'Current Status' should change to 'Will Apply on Startup'.
- Navigate to 'System -> Shutdown System'.
- Click on the confirmation checkbox, then click 'Shutdown System'.
- Note: Use of 'Restart System' is not recommended.
- Once the system shuts down, power off the system.
- After a few seconds, power the system back on again. The system will take a little longer to start than usual as the new software version is applied.
- Browse to the ACU-5000 and log in as the super user.
- Check the 'Help -> About' dialog to verify the software version was applied successfully.