ACU-1000 - Latest by module
NXU-2 - 3.0.1
NXU-2A - 1.09
ARA-1 - 3.03
QMT-1 - 1.05
Instructions
ACU-1000, NXU-2, NXU-2A
- Click on the appropriate link above
- Enter your contact information (name and email)
- Select the NetBurner tools and firmware
- Download the zip file to a directory on your computer
- Unzip the zip file and unpack the Netburner tools
- Configure your computer to the same subnet as the unit to be updated
- Run AutoUpdate.exe
- Enter the IP address of the unit or click ‘Find’
- Click Browse and select the *.s19 file
- Check “Reboot when complete”
- Click Update – the firmware will be loaded into the unit
- Click OK – the unit will reboot, running the new version
ARA-1
- Configure your computer to the same subnet as the unit to be updated
- Access the unit via its browser interface
- Load the .web firmware file from the Administration page of the browser interface
- See the manual for further details
QMT-1
- Download the firmware file(s) and AutoUpdate (in the Netburner Tools) to the same directory on the computer.
- Configure your computer to access the unit to be updated over the network.
- Run AutoUpdate.exe
- Enter the IP address of the unit or click Find if on the same local network.
- In the FileName box, enter the correct APP.s19 file or click Browse and select the file.
- Check "Reboot when complete".
- Click Update. The firmware will be loaded into the unit.
- Click OK. The unit will reboot, running the new version.
- Note: If the unit is a CPM-3, it will update other modules as necessary.